WARNING: For your safety the infor-mation in this manual must be fol-lowed to minimize the risk of fire or explosion or to prevent property dam-ag
TO CHANGE PROGRAMMED VALUES OR ZERO REGISTERS 1. Open both the upper and lower loading doors. 2. Unlock the control tray, carefully slide the contr
AVAILABLE OPTIONS The following two features are available in the dryer. Disconnect power from the machine for two minutes before modifying the mach
SERVICING DRYER CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. V
Instructions - Convert a Dual Voltage Stack Dryer from 120V to 208-240V with Neutral Wire Only 1. Remove incoming power from the dryer. Use a known
TABLE OF CONTENTS PAGE NO. Warnings about use and operation ... 2 I
3
INSTALLATION AND OPERATING INSTRUCTIONS UNCRATING AND PLACING DRYER Tools Required: 3/4" hex socket & ratchet driver, wood block 4" or
The sources of all make-up air and room ventilation air movement to all dryers must be located away from any dry cleaners. This is necessary so that
CAUTION: The dryer and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system
7. DRYER IGNITION (SOLID STATE IGNITION): The solid-state ignition system lights the main burner gas by spark. The gas is ignited and burns only wh
DESCRIPTION OF CONTROLS Both drums are controlled by the controller at the right midpoint of the dryer. The controller is two-in-one with the upper d
CHANGING PROGRAMMED DATA All operating parameters (vend price, temperature, cool-down times) are adjustable. Hours run and money count information c
Comments to this Manuals